VoIP Contact ID Alarm Transmissions
In an emerging VoIP environment where standard phone lines are replaced with packetized voice channels even our beloved Contact ID can become blured in the eyes of our Central Stations' High-End Receivers. Some VoIP Carriers Fall short in not reproducing some dual tone pairs used the Contact ID protocol. Other Fall short in disassembly of the timing constraints needed in the protocol defined by SIA standards.
Ipdatatel Inc. manufactures a Transmitter that can read the Contact ID output from compatable manufacturers alarm panels in a digital format that can then be relayed to your central station, Other signals like Open/Close or Away/Stay events can be peeled off for direct notifications to your customers via email, phone or sms/text notifications. The same Transmitter can be used by the end user to allow two-way remote access to the system using our branded dealer portal or while on the run with ipFob for the iPhone & ipFob for BlackBerry.
If you wish to become a dealer register here for detailed product information and samples.
Supported Panels:
DSC PC1616 / PC1832 / PC1864 soft rev 4.13 or greater and above rev. 03 Hardware.
Honeywell (ECP MODE, Fully Supervised) Vista 10P / Vista 10Psia rev. 4.0 and up / Vista 15P / Vista 20P / Vista 20PS / Vista 20PCN / Vista-128B / Vista-128BP / Vista-128FB / Vista-128FBP / Vista-250FBP / Vista250FBP-24
Honeywell Vista® is a trademark of Honeywell, Inc.
DSC is a registered trademark of Digital Security Controls Ltd.
Ipdatatel Inc. manufactures a Transmitter that can read the Contact ID output from compatable manufacturers alarm panels in a digital format that can then be relayed to your central station, Other signals like Open/Close or Away/Stay events can be peeled off for direct notifications to your customers via email, phone or sms/text notifications. The same Transmitter can be used by the end user to allow two-way remote access to the system using our branded dealer portal or while on the run with ipFob for the iPhone & ipFob for BlackBerry.
If you wish to become a dealer register here for detailed product information and samples.
Supported Panels:
DSC PC1616 / PC1832 / PC1864 soft rev 4.13 or greater and above rev. 03 Hardware.
Honeywell (ECP MODE, Fully Supervised) Vista 10P / Vista 10Psia rev. 4.0 and up / Vista 15P / Vista 20P / Vista 20PS / Vista 20PCN / Vista-128B / Vista-128BP / Vista-128FB / Vista-128FBP / Vista-250FBP / Vista250FBP-24
Honeywell Vista® is a trademark of Honeywell, Inc.
DSC is a registered trademark of Digital Security Controls Ltd.